Hi Paul,
Those cam clamps were excellent!!
The quality was superb.
Thanks again for making them.
They were worth twice the price.
Thanks, walter
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Cam Clamps http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=4178 |
Page 1 of 2 |
| Author: | Pwoolson [ Tue Dec 20, 2005 3:20 am ] |
| Post subject: | |
I've had a couple of requests for more cam clamps. So I'll go ahead and put the offer out there. If anyone wants in on cam clamps I'm going to make another batch. 6",8", 12" are what I have available. I'll have to raise the price slightly to $12 each as I lost money last round. I'm not really doing it for the money, just a service to my pals here. Let me know and I'll start planning the lumber purchase. |
|
| Author: | John How [ Tue Dec 20, 2005 3:29 am ] |
| Post subject: | |
Paul, these dimensions are the reach correct? |
|
| Author: | WalterK [ Tue Dec 20, 2005 3:47 am ] |
| Post subject: | |
Hi Paul, Those cam clamps were excellent!! The quality was superb. Thanks again for making them. They were worth twice the price. Thanks, walter
|
|
| Author: | Graham Steward [ Tue Dec 20, 2005 4:02 am ] |
| Post subject: | |
Paul, Could you post some pictures of the clamps? I'm not entirely certain what they look like. 
Thanks |
|
| Author: | Michael Dale Payne [ Tue Dec 20, 2005 7:44 am ] |
| Post subject: | |
Paul when you figure my order for after the New year change it to 4 8" and 4 6" Thanks Paul Michael |
|
| Author: | Pwoolson [ Tue Dec 20, 2005 7:53 am ] |
| Post subject: | |
[QUOTE=MichaelP] Paul when you figure my order for after the New year change it to 4 8" and 4 6" Thanks Paul Michael[/QUOTE] 8 total, you got it. P |
|
| Author: | LanceK [ Tue Dec 20, 2005 9:49 am ] |
| Post subject: | |
Paul, how long we got to get in? im thinking maybe 10, but ive got to clear it with the boss which at this time, may take a little smooshing
|
|
| Author: | Pwoolson [ Tue Dec 20, 2005 9:59 am ] |
| Post subject: | |
[QUOTE=LanceK] Paul, how long we got to get in? im thinking maybe 10, but ive got to clear it with the boss which at this time, may take a little smooshing[/QUOTE]
No hurry. In fact, I'm not going to be able to get on these right away. Hopefully around the first of the year. Just let me know. P |
|
| Author: | Laurent Brondel [ Tue Dec 20, 2005 10:04 am ] |
| Post subject: | |
6, 8 and 12 are the span or the reach? I would assume the span, what is the reach then, 4 1/2"? I'd be interested in more than a few. |
|
| Author: | Roy O [ Tue Dec 20, 2005 4:37 pm ] |
| Post subject: | |
Paul, Put me down for 4 of the 8" and 2 of the 6". Many thanks for doing this for us. Roy |
|
| Author: | Howard Klepper [ Tue Dec 20, 2005 8:31 pm ] |
| Post subject: | |
Best cam clamps I have. I'm glad to see you are making more. Charge enough to make something at it; they are worth it. I'll figure out my needs and get an email to you in a week or so. |
|
| Author: | BlueSpirit [ Tue Dec 20, 2005 9:10 pm ] |
| Post subject: | |
Paul, I'll take 6 of the 8" and 4 of the 6". Hope that's not too many. This is really great of you Paul. Thank you so much for taking the time to make these. |
|
| Author: | Pwoolson [ Tue Dec 20, 2005 11:57 pm ] |
| Post subject: | |
Hey guys thanks for the interest. I don't want anyone to be confused by termanology so I'm including a little drawing of the dimension I'm talking about. Oops, the image placer isn't working. Go here to see the pic Cam Clamp In the interest of maximizing the metal stock, I made all of the bars 12" long which would render about a 10" opening when maxed out. If you need something different than that, we can work something out. Keep in mind that by nature of this device, when you lengthen any part of the system, you reduce clamping pressure. This is true with the 12" clamps. They don't have nearly the force that the 6" clamps have. Any questions, let me know. Paul |
|
| Author: | Tom Dowey [ Wed Dec 21, 2005 12:05 am ] |
| Post subject: | |
Paul, I will take 2 each of the 6" and 8". Total of 4 Cam Clamps. |
|
| Author: | Bobc [ Wed Dec 21, 2005 12:19 am ] |
| Post subject: | |
Paul I'll take 6 of the 8" clamps |
|
| Author: | bob J [ Wed Dec 21, 2005 3:38 am ] |
| Post subject: | |
Paul, I'll take 8 8" and 4 12"' Thanks Much, |
|
| Author: | John Mayes [ Wed Dec 21, 2005 3:44 am ] |
| Post subject: | |
man I need some of these.... Let me go rob a Krispy Kreme (they always have people lined up so I know they got to have lots of dough..and not just the doughnut kind) and I'll see how many I can afford... |
|
| Author: | Dave-SKG [ Wed Dec 21, 2005 3:49 am ] |
| Post subject: | |
Paul, I'll take 10 of the 6". |
|
| Author: | Laurent Brondel [ Wed Dec 21, 2005 3:57 am ] |
| Post subject: | |
Paul, just sent you a PM, I'll take 4 of the 6". |
|
| Author: | BlueSpirit [ Wed Dec 21, 2005 7:18 am ] |
| Post subject: | |
Now that I've seen the drawing Paul, please change mine from 6 of the 8" and 4 of the 6" to 10 of the 8". So my order would be 10 clamps of the 8" type. |
|
| Author: | Dave Anderson [ Wed Dec 21, 2005 11:22 am ] |
| Post subject: | |
Paul, Thanks a lot for doing this.  I'll take 4-6" and 2-12"
|
|
| Author: | sfbrown [ Wed Dec 21, 2005 11:44 am ] |
| Post subject: | |
Dumb Newbie Question alert!!!
I'm assuming that these clamps would be good to do things like clamp down the bridge? If this is the case, which length and how many should I have to perform said function? I'm building a classical, btw, Thanks, Steve Brown |
|
| Author: | Bobc [ Wed Dec 21, 2005 12:17 pm ] |
| Post subject: | |
Hey Paul Looks like you'll be building clamps until next Christmas  |
|
| Author: | Todd Rose [ Wed Dec 21, 2005 12:26 pm ] |
| Post subject: | |
Paul, I'd like 2 each of the 6" and 8" (four clamps total). Much appreciated! |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|